Curing Compound

Product Details:

Concure WB Water Based Curing Compound is a white, low viscosity wax emulsion which incorporates  a special alkali reactive emulsion breaking system. 

• This system ensures that the  emulsion breaks down to form a non penetrating continuous film immediately upon contact with a cementitious surface. 
• This impervious film prevents excessive water evaporation which in turn permits more efficient cement hydration, thus reducing shrinkage and increasing durability.
• Once formed, the membrane will remain on the concrete surface until eventually broken down and eroded by natural weathering.  
• Where it is required to apply a further treatment to such concrete surface, it may be necessary to remove the membrane remaining after curing by wire brushing or other mechanical means.

Product Details:

Other Details:

• As a spray applied membrane to retain moisture in concrete for effective curing. Suitable for all general concrete applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and bridgeworks.

Product Details:

Concure1315 Concrete Cure Compound can be used in a wide range of applications: High rise construction to eliminate water curing Floors, warehouses, slabs and columns Dustproofing concrete walls and floors Clear sealer for concrete Self-curing, primer system to subsequent coverings.

Product Details:

Dr Fixit Concrete Guard is a solvent based composition of acrylic solution polymer, properly selected & graded inert fillers, light fast pigments & additives. It is specially formulated to protect reinforced concrete and other masonry cementitious substrate that is directly exposed to atmospheric conditions like UV radiation, high humidity, heavy rain, industrial pollution, & carbonation. It penetrates into the porous concrete substrate, producing an exterior masonry impermeable coating

Product Details:

Sika FerroGard-903 Corrosion Inhibiting is a surface applied corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete. It is designed to penetrate the surface and then to diffuse in vapor or liquid form to the steel reinforcing bars embedded in the concrete. Protection with Sika® FerroGard®-903 both delays the start of corrosion and reduces the corrosion rate. Corrosion protection with Sika® FerroGard®-903 increases the service and maintenance life cycles by up to 15 years when used as part of a complete Sika® Concrete Repair and Protection System. 

Product Details:

Fosroc Conplast NC Water Reducing Admixture is guaranteed completely free of all forms of chloride and is supplied as a light straw coloured liquid. The main active ingredient is an inorganic formate.

Advantages:

• hloride free, safe in prestressed and reinforced concrete
• Produces exceptionally high early strengths
• Plasticising action gives increased workability and / or increased strengths
• Early setting improves frost resistance
• Suitable for bricklaying mortar mixes
• Particularly effective in concrete at low temperatures

Product Details:

Sika FerroGard-901 Corrosion Inhibiting Concrete Admixture is a Bipolar corrosion inhibiting liquid concrete admixture based on Sika® FerroGard® Technology for use in reinforced concrete and mortar. It acts as a corrosion inhibitor for the steel reinforcement. By using Sika® FerroGard®-901 (IN), the life expectancy and durability will be substantially increased.

Product Details:

Product Details:

Resikure A Acrylic Emulsions which when used on fresh concrete / mortar surface, seals the concrete surface temporarily and prevents rapid evaporation of  moistures  from the concrete. It forms a thin layer for complete curing period and improves the durability of the concrete. 

Product Details:

Sika Antisol-E(WP) Concrete Sprayer is sprayed on to newly laid concrete surfaces to form a thinfilm barrier against premature water loss and thereby promote total cementhydration. It is particularly recommended for large areas of exposed concrete suchas Highways, Runways and taxiways, Aprons and hard standings, Roof decks, Canals linings.

Product Details:

Fosroc Hydroproof Xtra Polymer Cement Waterproof Coating is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an eff ective waterproof membrane.