Epoxy Bonding Agent

Product Details:

Dr. Fixit Epoxy Bonding Agent is a two part solvent free bonding agent composed of liquid epoxy resin and hardener. It is used for bonding of structural concrete new to old concrete and bonding agent for bricks and steel components because it gives excellent bonding properties to freshly mixed concrete/mortars, glazed bricks, tiles, etc.

Product Details:

Dr. Fixit Pidigrout 10M comprises of hydraulic setting binders, selected aggregates and expansion control additives that need only addition of the requisite quantity of water at site. It is used for grouting of machinery and equipments as it is ready to use, non-shrink, free-flowing, high strength and dynamic load stable cementitious grout.

Product Details:

Dr. Fixit Bitufix is an emulsified thixotropic bitumen protective coating. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission.

Product Details:

Sikadur 32 Epoxy Bonding Agent is a solvent free, two components, bonding agent, based on selected epoxy resins.

Product Details:

Sikadur® -32 LP is a solvent-free, two component bonding agent, based on selected epoxy resins. Complies with ASTM C 881-78 type II, Grade 2 Class B+C

Uses Sikadur® -32 LP provides a bond of far greater strength than the tensile strength of the concrete itself. Therefore it is suitable for use as a structural bonding agent for : ??? New to existing concrete ??? Mortar ??? Steel, Iron

Characteristics / Advantages ??? Easy to mix and apply ??? Solvent free ??? Excellent adhesion to most structural materials ??? Unaffected by moisture ??? Highly effective even on damp surface ??? Workable at low temperatures ??? High tensile strength ??? Longer pot life

Product Details:

Epoxy based, two component structural bonding agent. Sika® Hibond complies with ASTM 881 – 87 Type II Grade 2 Class B and C.

Sika Hibond Epoxy Bonding Agent is a structural bonding agent applied between old and new concrete surfaces during casting of roof slabs, retaining walls, water tanks, columns,extension of balconies, etc

Characteristics / Advantages ??? Long pot life and open time allows sufficient time for placement of new concrete ??? Can be applied on moist surface also ??? Once the two components of the material is mixed the material must be used within approx 4 hours.

Product Details:

Sikadur-31C Epoxy Adhesive is solvent-free, thixotropic two part epoxy based adhesive for bonding Sikadur -Combiflex tape or Sikadur -Hypalon strip to different substrates.

Product Details:

Basf Masterbrace 1414 Epoxy Bonding Agent is a solvent free, high performance, long pot life, versatile epoxy bonding agent. MasterBrace1414 can be applied to both dry and damp surfaces and adheres to most substrates after proper preparation.

RECOMMENDED USES
• Structural bonding of new to old concrete • Steel bonding • Grouting dowels

FEATURES AND BENEFITS • Adheres to wet or damp surfaces–Wide application area • Solvent free–Low VOC and non-shrink • Pre-proportioned packaging–No job site errors • Multi-purpose binder– Many uses • Low viscosity–Easy to apply as primer • High abrasion and chemical resistance– Can be used as wearing surface

Product Details:

Fosroc Nitobond Ep Epoxy Bonding Agent is based on solvent-free epoxy resins containing pigments and fine fillers.  It is supplied as a two-component material in pre-weighed quantities ready for on-site mixing and use. The ‘base’ component is white and the ‘hardener’ component is black, providing visual evidence (uniform grey colour) that adequate mixing has been achieved. 

Product Details:

Cemshield PS GG & PG Grout is a two component fuel resistant elastomeric joint sealant based on liquid Polysulphide resin and catalyst.

Product Details:

Dr. Fixit Coal Tar Epoxy Coating is two-part coal tar epoxy based coating, composed of best quality dehydrated coal tar, liquid epoxy resins and curing agent, properly selected & graded inert fillers, additives and solvent. It is used as an anticorrosive & protective coating for concrete as well as steel structure because it has excellent chemical resistance properties in atmosphere or in contact with chemical solutions such as effluents, sewage, salty water and organic / inorganic acids & alkalis. It is most suitable for structures in submerged conditions. 

Product Details:

Sikagard- 67 2-Part Water Based Protective Epoxy Coating is a water based, solvent free, odourless, epoxy resin protective coating. Applied on concrete, rendering, stone, asbestos and cement  Protective coating against weathering and mild chemical attack in areas such as cantilevers, galleries, retaining walls, basements, workshops, reservoirs and balconies.

Product Details:

Sikagard® -694 F (I) is a solvent free epoxy resin based putty like material. It has the special property that it is a moisture insensitive repair material.
Sikagard® -694 F(I) is recommended for : ??? Sealing of cracks both underwater and in dry conditions ??? Sealing of cracks for concrete, metal and wooden surfaces ??? Protection of concrete, steel, marine structures as protective coating at or below the water line.