Rust Remover and Passivator

Product Details:

Sunanda Rusticide Rust Remover And Passivator is A Single Component Sulphate And Chloride Free Liquid, Which In One Operation Removes Rust And Prevents Further Rusting Of Steel.

Applications:
Removes rust and prevents further rusting of

• New/ old reinforcement steel in new construction.
• Embedded steel in repairable structures.
• Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters and other structural members. 

Advantages:

• Rusticide Performs Rust Removal And Rust Prevention In One Operation In Mild Conditions.

Product Details:

Uses:

• Reebaklens RR is used as a rust remover from steel bars prior to encasing in concrete / microconcrete. It can also be used on ohter steel surfaces prior to coating with epoxy systems.

Advantages:

• Rapid Action: Safe with metals (except zinc and galvanised steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease.

Description:

• Reebaklens RR cleaning agent is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear green solution.

Technical Support:

• Fosroc provides a technical advisory service to specifiers, end-users and contractors as well as on-site technical assistance in locations all over the country.

Application instructions:

• For rusted metal (iron base): Apply Reebaklens RR with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth.
• Removal of rust and mill scale: Prewet the floors, then using a stiff bristle broom, brush the affected areas with a solution of Reebaklens RR cleaning agent and water. Strength of the solution required will vary but should be between 1 : 1 and 1 : 4 (Reebaklens RR cleaning agent to water) When the action has finished, wash down thoroughly with clean water. Wire brush again to remove remaining loose material and finish by thoroughly washing down with clean water. Repeat if necessary. High degree of rust or scale can be removed by soaking in the Reebaklens RR cleaning agent solution for 60 minutes.

Product Details:

Sika Rustop Anti-Corrosive Coating for Steel and Concrete is cement bound synthetic resin modified 2-component coating for corrosion protection on reinforcement and concrete. Ideally suited to rehabilitate corroded reinforcement.

Product Details:

Dr. Fixit Rust Remover is based on chloride free chemical & additive solution in water. it is used as rust remover which effectively cleans rust from steel surfaces, before application of any protective coating.

Typical Applications:

• On re-bars during repairs to reinforced concrete structures.
• Maintenance of mild steel structures like tanks, water pipelines, shuttering plates and other corroded steel surfaces.

Features:

• Ease of application - Ready to use, easily applicable by brush.
• Penetration & effect - Effective rust removal even from areas difficult to reach & penetrate.
• Chloride free - Contains no chloride hence no chance of enhancing further corrosion.
• Economical - Cost effective because of good coverage.

Product Details:

Other Details:

• Sika Rustop is cement bound synthetic resin modified 2-component coating for corrosion protection on reinforcement and concrete. 
• Ideally suited to rehabilitate corroded reinforcement

Product Details:

• Polyalk Fixoprime is a highly alkaline, polymeric, elastomeric formulation specially designed to protect steel from corrosion by passivation mechanism

Product Details:

Resikon Coastal Acrylic Copolymer is a chemically modified acrylic copolymer used in combination with Portland cement. 
These two components should be mixed at site with paddle type mixer to form slurry of creamy thick paint consistency.

• Water can be added in a small proportion to get workable consistency.

Product Details:

Rustoff 100 Rust Remover Cum Passivator is a single component liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat.

Product Details:

Resikon RSK Rust Preventives is highly effective polymer based rust converter. It reacts with iron and rusted surfaces to form chemical complex termed as “chelate complex”. The reaction is known as “chelation” where ferric tannic complexes are formed. This reaction stabilizes oxidation process while polymer in RESIKON RSK gives additional physical protection to metal surfaces. 

Product Details:

Uses:

• For the removal of mortar and plaster runs, droppings and stains from brickwork and concrete surfaces. Also for removal of hardened concrete from tools, machinery and equipment, or rust and mill scale from steelwork. 
• Suitable for etching of concrete floors and surfaces prior to application surface coatings.

Advantages:

• Rapid action Safe with metals (except zinc and galvanised steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease.

Description:

• Reebaklens is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear blue solution.

Technical Support:

• Fosroc provides a technical advisory service to specifiers, end-users and contractors as well as on-site technical assistance in locations all over the country.

Application instructions:

• Cleaning brickwork: A small trial area should be cleaned first to determine the most suitable Reebaklens cleaning agent dilution. Pre-wet the brickwork, then using a sponge, rub the affected areas with a solution of Reebaklens cleaning agent and water. Strength of the solution required will vary but should be between 1:1 and 1:4 (by volume of Reebaklens cleaning agent to water). When the action has finished, wash down thoroughly with clean water.

Product Details:

Masteremaco P 130 Two Component Epoxy Based Zinc Rich Primer For Steel is a two component, solvent borne zinc rich epoxy primer, providing active galvanic protection to steel. It is a thick grey liquid of paint-like consistency, recommended for use where chloride induced attack on steel is likely.

Product Details:

Dr. Fixit Epoxy Zinc Primer is a two-component system based on metallic Zinc and epoxy resin, hardener & additives which on mixing gives a grey coloured liquid. Dr. Fixit Epoxy Zinc Primer is recommended for coating on steel reinforcement or steel surfaces as an anti corrosion primer. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations.

Product Details:

WD-40 lubricates moving parts such as hinges, wheels, rollers, chains, and gears. It protects against rust and corrosion on items like tools, and sporting equipment. It penetrates to free stuck corroded parts like nuts, bolts, valves and locks. It quickly removes adhesives, corrosion and paint. It displaces moisture to restore water flooded equipment such as engines, spark plugs and power tools.

Product Details:

Nitoprime Zincrich Epoxy Resin Based Primer is recommended for priming exposed steel reinforcement for use with Fosroc concrete repair mortars. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations. Nitozinc Primer is compatible with all Renderoc mortars and fluid micro concretes.