Sealant and Bonding

Product Details:

Nitoseal PU 40 One Part Building Sealant is a one part, low modulus gun-grade elastomeric sealant based on polyurethane technology.  Nitoseal PU40 may be applied to joints between 5 and 35mm wide. 

• To minimise stress imposed on the joint sealant, all moving joints should be designed to an optimum width to depth ratio of 2:1 with an overriding minimum depth 5mm for nonporous surfaces and 10mm for porous surfaces. For joint widths exceeding 35mm, please contact your local Fosroc Technical Service Department.
• Nitoseal PU40  is suitable for sealing joints in concrete, brickwork, blockwork, precast panel joints, stone cladding, perimeter sealing around doors and windows, and nontrafficked floor joints.

Product Details:

FOSROC Thioflex 600 Polymer Sealant, Sealing movement joints in building and civil engineering structures, including superstructures, floors, basements and subways.

Product Details:

Details:

• It is used in both vertical and horizontal expansion joints in many types of buildings  and civil engineering constructions

Product Details:

A high strength, high grab adhesive sealant which bonds multiple substrates, especially suited for all kinds of interior & exterior fit-outs. It is environment friendly, has good weatherability, excellent UV resistance and high durability. it is paintable. Mounting and pasting of metals, Aluminium, glass, Plastic, wood, concrete, Marble, Stone etc.

Product Details:

Selsil Acrylic Sealant is flexible, one component acrylic sealant. One-component. Very easy application.Form permanently water-repellent layer after curing.Resistant to weather conditions. Remains flexible for a long time after curing.Paintable. Does not affect the application surface.Water, wind and moisture resistant on aluminum, wood and PVC frames and windows

Product Details:

Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2- component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.

Product Details:

SikaBond®-124 Instant Nails is a 1-part, rigid, adhesive with high final strength that bonds most common con- struction & industry material substrate. Internal and covered external use.

Product Details:

Construction (AP) One-part Polyurethane Elastic Adhesive Sealant is a one-part, moisture curing, elastic joint sealant suitable for movement and connection joints. 

•  One-component, ready to use  Good adhesion to many substrates  Excellent workability, easy to smooth  Can be overpainted / sanded  Low stress to the substrates

Product Details:

Sikaflex- 11FC Polyurethane Adhesive Sealant is a one part polyurethane high modulus flexible sealant. Sikaflex -11 FC is for indoor and outdoor application. Joints in the construction industry, particularly where a higher modulus and lower movement capacity are required for joints with low or medium movement. Connection joints between floor/stairs and wall. Connection joints between floor and machinery. Seam sealing / sealing of pipe ducts / ventilation systems. Multi purpose in metal and wood construction work.

Product Details:

Dr. Fixit Polyurethane Joint Sealant is a one-part polyurethane joint sealant suitable for horizontal and vertical use. Dr. Fixit PU Sealant meets the requirement of ASTM C920 and ISO classification F25LM.

Product Details:

Cemshield PS GG & PG Grout is a two component fuel resistant elastomeric joint sealant based on liquid Polysulphide resin and catalyst.

Product Details:

Pidiseal PS-41G Sealent is a two-part elastomeric sealant based on a liquid polysulphide polymer which when mixed with accelerator (curing agent) cures by chemical reaction to form a tough, flexible rubber seal. This sealant has excellent Fuel resistance, adhesion to different substrates like masonry, concrete with excellent movement accommodation. It is far more superior to conventional joint sealant materials such as bitumen, mastics and expansion-sheets.

Product Details:

BRONCO® CEMSHIELD PU(S) is a single Component polyurethane sealant based for horizontal & Vertical Surface.

Product Details:

Bostik Build is a high quality neutral curing, low modulus 100% silicone sealant that provides a permanent flexible, durable, watertight seal for general purpose sealing. It exhibits excellent adhesion to alkaline surfaces such as concrete, fibrous cement, mortar, and plaster.

Product Details:

FEVISEAL WEATHERPROOF PRO is a one-part, medium modulus, neutral curing silicone sealant for use in new or remedial weatherproofing applications. In addition to the unique features of silicone rubber such as superior high and low temperatures resistance, water resistance, and outstanding weatherability, Feviseal weatherproof Pro also provides excellent adhesion to glass, metal and numerous construction materials. 

Product Details:

FEVISEAL NEUTRAL PRO a one part Neutral Cure Silicone Sealant is a non-slump, moisture-curing RTV (room temperature vulcanizing) that cures to form a tough, low modulus rubber for long-term flexibility and durability. The neutral curing mechanism is ideally suited for use in confined work areas since no objectionable odours are evolved.

Product Details:

Dr. Fixit Silicone Sealant is an acetoxy cure, high modulus and single component silicone sealant. When properly cured, it becomes a permanently elastic compound. It has excellent adhesion to glass, ceramics and sanitary ware etc.
Specification Meets the requirement of BS 5889: 1990 standard.
Areas of Application
} Ideal for sealing glass and aluminum & non-oily wood.
} Sealing of aluminum/glass window frame joints, fixing glass into aluminum frames in lieu of rubber beading. Features & Benefits
} Ready to use - No mixing is required, directly applicable through cartridge. } Solvents free – No solvent hence eco-friendly.
} Sagging – It is completely non-sagging in nature.
} Flexibility – Tough & flexible after curing so performs well during expansion & contraction.
} Curing – Cures by moisture absorption from air at ambient temperature & relative humidity.
} Service temperature – From – 60 to +180oC.
} Plastic deformation – Up to 95% recovery after plastic deformation.
} UV resistant - Good UV resistance & insulation properties.
} Self priming - No primer is required when sealing joints in glass, ceramics and vitreous surfaces

Precautions & Limitations
} Do not use in fish tanks and food industries.
} Do not use for structural glazing application } Not to be used where over coating of painting to be done.
} Do not use for filling gaps on masonry & cementitious surfaces.
} Not for application requiring architectural sealant. 

Additional Information:

• Packaging Details: 280 ml & 240 ml plastic cartridge with separate nozzle.

Product Details:

Dr. Fixit PU Sealant is a one-part moisture curing Polyurethane Sealant composed of polyurethane polymer, pigments, fillers & additives. It is used for filling and sealing joints in buildings & structures. It is highly elastic & resilient, weather-durable, non sagging, watertight with excellent adhesion to almost all building construction materials.

Product Details:

Usage:

• For sealing internal floor joints subject to heavy industrial use in factories, food processing areas, warehouses and maintenance facilities. Particularly suitable for sawn joints in long strip flooring and other large internal areas

Product Details:

Dr. Fixit Silicone Sealant GPS Is a versatile one component sanitary acetic silicone sealant for sealing building joints and glazing systems. After application the silicone cures with atmospheric moisture to form a durable rubber seal. 

Product Details:

Selsil Fire resistant acrylic sealant is one component, acrylic emulsion based and specially formulated for being barrier against fire. Suitable for below applications: precast panel joints, control joints in masonry blockwork and sealing around metal ducting, pipe-work etc. Water based, contains no asbestos or fibres. Easy application. Short surface curing. Paintable. Good Adhesion to concrete and masonry substrates, flexible.

Product Details:

Selsil SPU-40 polyurethane sealant for metal, construction is a medium modulus one- component polyurathane sealant that cures when exposed to atmospheric humidity. It has excellent adhesion to all of the most common building materials such as concrete, brick, ceramic, glass, wood, galvanized and painted sheet and various plastics. paintable. Does not vary in volume.
Exceptional thixotropy. Expansion joints in floors, indoor and outdoor applications for pedestrian and busy areas, prefabricated concrete panels. Sealing against water, air, gas and dust. 

Product Details:

Selsil Ultra Clear cryastalline Hybrid Sealant is a perfecttly transparent, elastic, highly thixotropic adhesive. Ideal for both vertical and horizontal applications. paintable. Does not shrink. Does not contain solvents, siliconesvand isocyanetes. Srong adhesion on many surfaces. Does not foam with moisture. Does not require primer. Compliant with specification requirements for VOC content. Excellent adhesive power even without primer on all of the most common materials such as aluminium, zinc, galvanized steel, stainless steel, copper, stone, concrete, bricks etc. Perfect for application as transparent and elastic bonding in the construction field.

Product Details:

Product Details:

Selsil Ultra Flex adhesive is a one component, moisture curing, high-performance adhesive based on hybrid polymers. Selsil Ultra Flex is suitable for mounting and pasting of materials such as metal, aluminium, glass, plastic, wood and concrete with each other ( it is not recommended to use in PMMA and polycarbonate type materials and there is no adhesion on PE, PP, PTFE (Teflon), silicons and bituminous substrates).

Product Details:

Selsil Fire sealant is a mastic based on sodium silicate and with its special formulation, it is designed to withstand up to 1500C. Purpose designed for sealing and assembling stovs, ovens, barbecues. Fast hardening, low odor, solvent free and no cracking. Excellant adhesion to most porous building materials and metals.