Free Flow Non Shrink Grout

Product Details:

Sika MonoTop®-108 Water Plug IN is a ready to use, rapid-setting, waterproof cement mortar for stopping water leaks in concrete and masonry. 

Product Details:

Dr. Fixit Pidigrout 10M comprises of hydraulic setting binders, selected aggregates and expansion control additives that need only addition of the requisite quantity of water at site. It is used for grouting of machinery and equipments as it is ready to use, non-shrink, free-flowing, high strength and dynamic load stable cementitious grout.

Product Details:

Grout may be a material generally consisting of water, cement, and sand. It is typically used for filling voids under machines or other structural elements, sealing joints and openings in surfaces, and reinforcing existing structures.

Product Details:

Sikadur 53 UF Grouting Compound is used as an injectable resin to seal damp, wet and submerged cracks by high pressure injection. 

Product Details:

Conbextra GP2 Grout is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Product Details:

Sikadur 42 MP IN Epoxy Grouting System is a three component, multipurpose, solvent-free, moisture tolerant epoxy grouting system. For use at temperature between +25°C and +40°C. 

Product Details:

Sikadur 42 Grout Pak is a solvent-free, 3-component, pourable grout, based on a combination of high strength epoxy resins and specially graded aggregates. After mixing, it provides a free flowing self-levelling epoxy grout.

Product Details:

Sikadur 53 UF Grout Moisture Insensitive Injection Resin is an epoxy based solvent free 3-component ready to use moisture insensitive pourable grout. It has been developed to meet special requirement of grouting in wet/ under water. After mixing, the liquid is poured into the cavity where it displaces the water cures to a rigid high strength material.

Product Details:

Dr. Fixit Pidicrete AM is composed of plastisizers, expansion additives, polymers & defoamer. It is used for producing cementitious injection grouts for pressure / gravity injection into concrete structures, for producing cementitious grouts, which are suitable for bed grouting, duct grouting, filling etc. because it provides plastisizing action which improves flow, expansion additive provides shrinkage compensation after curing & high compressive strength.

Product Details:

BASF MasterFlow 718 Grout is a ready to use, non-shrink, natural aggregate cementitious grout for use in general civil engineering works. MasterFlow 718 provides extended working life and high early and ultimate strengths.  

Product Details:

Basf Masterflow 880 Grout is a non-shrink, iron reinforced precision grout with high early and ultimate strengths. It is formulated to provide extended working time even at high ambient temperatures when mixed and placed at any recommended consistency. MasterFlow 880 is normally placed at a flowable consistency to completely fill voids between 10mm and 100mm.

Product Details:

Basf Masterflow 410 Grout is a solvent-free low exotherm, filler extended grout, based on modified epoxy resin and is designed for use as a precision, heavy duty chocking grout for engineering applications. It is supplied as a three component system consisting of epoxy resin, combined with inert fillers and the hardener, to produce a high viscosity flowable liquid grout suitable for voids of 50-150mm.

Product Details:

Roff Rainbow Tile Mate Epoxy (RTM Epoxy) is a stainless, chemical resistant, hard wearing & impervious epoxy based tile joint filler which has high degree of resistance to abrasion, impact & shocks. It is designed for grouting gap between glazed, ceramic, porcelain, vitrified & fully vitrified tiles, natural stones & Glass mosaics. Roff RTM Epoxy can also be used as a high-performance epoxy adhesive for fixing tiles & stone. 

Product Details:

Sika Grout-214 Cementitious Grout is a cement based 1-component, ready to mix, non-shrink, ready to use, pourable and flowable, two stage expanding engineering grout in dry powder form. It is widely used for precision grout-ing in engineering objects subjected to static and dy-namic loads.

Product Details:

Chryso Excem V1 Cement Grout a ready to use chloride free blend of dry powder when mixed with clean water, it produces a free flowing, non- shrink high strength grout. The material is based on cement, graded aggregate fillers and additives which imparts controlled expansion of mortar and reduces water demand, thus ensuring positive contact with machine base plate, high early strength and long term durability. EXCEM – V1 conforms to ASTM C 1107, Grade-A

Product Details:

Fosroc Cebex 100 Grout Admixture is an admixture for cementitious grouts where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing.

Product Details:

Cemcon Grout 60 Non Shrink Free Flow Grout is ready to use blend of dry powder which mixed with clean water, it produces a free flowing, non- shrink grout. The material is based on cements, graded aggregate fillers and additives which imparts controlled expansion of mortar and reduce water demand, thus ensuring positive contact with machine base plate, high early strength and long term durability. 

Product Details:

SikaGrout®-214 IN S is a cement based 1-component, ready to mix, non-shrink, ready to use, pourable and flowable, expanding engineering grout in dry powder form. It is widely used for precision grouting in engineering objects subjected to static and dynamic load.

Product Details:

Provides a free flowing resin, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It can be used for grouting applications as well as injection of static and structural cracks. It is suitable for a wide range of heavy duty applications.