Waterproof Water Repellant Coating

Product Details:

Sika Cool Coat Primer is a versatile water-based primer comprising of self-crosslinking  acrylic emulsion polymer & additives in water as a medium. This primer can be used as a seal coat for various water based Sika products like Sika® CoolCoat,  Sikagard® XT etc. and where ever green construction is desired.

Characteristics / Advantages:

• Suitable primer for internal and external surfaces.
• Smaller polymer particles penetrate deeply to provide excellent substrate adhesion.
• Suitable for porous substrates with over coating.
• High Alkali resistant – Due to self-crosslinking polymers it gives very high resistance to alkaline substrates and protect the top coat.
• Efflorescence resistance - Due to self-crosslinking polymers it gives very high efflorescence resistance.

Product Details:

Nitocote SN 522 Non Staining Water Repellent is a single component, penetrating silane-siloxane which penetrates into porous substrates and then reacts to produce a bonded water repellent lining. Although allowing water vapour to escape from the substrate, it significantly reduces the absorption of water and water-borne salts.

Advantages:

• Penetrates into substrates
• Non staining
• Reduces water and chloride intrusion
• Increases freeze thaw resistance
• Minimises effloresence
• Allows water vapour to escape from the structure
• Resistant to atmospheric contaminants

Product Details:

Zydex Zycosil Waterproofing Simplified is a breathable 100% Reactive Organosilane Nano water repellant. When applied on a siliceous substrate, it penetrates deeply inside the substrate and becomes an integral part of the structure. It converts a water absorbing surface to a + + water repellant one. Zycosil is water dilutable, safe, sprayable and easy to apply. Zycosil is permanent, non-leachable & UV resistant.

Application Method:

• The substrate should be cured, dry, free from voids (honey combs). For substrates with oil, grease, fungal growth etc., clean and + dry the surface thoroughly before application. Zycosil should be diluted with potable water (TDS <1000 ppm) at a ratio of 1:20. A translucent to transparent solution should be obtained. The diluted solution should be liberally sprayed till saturation. On + vertical surfaces apply Zycosil from bottom to the top to eliminate drip marks. For doing any Screeding / Plastering / Tiles / + + Paint work on the treated surface, ZYCOPRIME (Acrylic Bonder) must be added to the Zycosil Solution.

Product Details:

Zydex Zycosil Max Organosilane Reactive Waterproofing is a 100% Reactive Organosilane Nano-Sealer. When applied on a siliceous substrate, it penetrates up to 3-4 mm inside the substrate and becomes an integral part of the structure. It converts the nature of the substrate from hydrophilic to hydrophobic. ZycoSil Max is water dilutable, safe, sprayable and easy to apply. ZycoSil Max acts like a 3-4 mm deep 'skin' (breathable) to your building as against a polymer or paint film that acts like a 'Band-Aid' on your Building. The peel-off issues are eliminated as ZycoSil Max is non-leachable & UV-Resistant. It has a dual property of preventing of ingress of liquid water while allowing moisture vapours to escape.

Product Details:

Sikagard 72W Silane Siloxane Based Water Repellent Coating is an impregnation for cementitious, brick & stone cladded substrate to impart water repellency. It impregnates into the open pores of the substrate to stop water absorption maintaining the breathing character of the substrate.

Characteristics /Advantages:

• Easy to apply
• Reduces capillary water absorption
• Improves resistance to frost and de-icing salts
• Transparent surface treatment
• No efflorescence
• No dirt penetration
• Reduces the growth of algae and fungi
• Lotus leaf effect
• Prolongs life of paint.

Product Details:

Roff Stoneguard SB is solvent based impregnating sealer for grout & stone backside. It is transparent in nature.

Product Details:

Roff Stoneguard WB is water based penetrating sealer for porous & non porous stones It transparent in nature & protects stone with advanced penetrating microbond technology. It protects stone or tile from water as well as stains.

Product Details:

Dr. Fixit Repellin WR Silicone Based Water Repellent is composed of Siloxane & Silane polymers dispersed in high boiling point solvent. It is used for waterproofing of concrete & cementitious vertical walls of building because it penetrate deeply into the substrate & provides an effective water repellent protective coating. It does not changes the appearance of the substrate & the water repellant coating is uv resistant and durable.

Features & Benefits: 

• Ease of application - Ready to use, simply brushable or spray applied.
• Staining - Clear coating does not stain the treated surface.
• Appearance - Does not change the appearance of exterior decorative coating.
• Vapour transmission - Prevents entry of moisture into the wall, but allows moisture to evaporate out.
• Efflorescence - Prevent efflorescence.
• Economical - Cost effective.
• Penetration – Due to low viscosity penetration is high, which provides the hydrophobic zone

Product Details:

Roff Hypel is a water based silicone colourless liquid repellant is applied on a siliceous/mineral surfaces especially on exterior building brickwork, concrete cement/sand rendering, plastering, natural or cast stone. reduces the phenomenon of efflorescence due to soluble salts in brick work.